syslog, klogctl - read and/or clear kernel message ring buffer; set console_loglevel

I int syslog(int  type , char * bufp , int  len );
                /* No wrapper provided in glibc */
 /* The glibc interface */

#include <sys/klog.h>
 I int klogctl(int  type , char * bufp , int  len );

If you need the libc function R syslog () (which talks to syslogd(8)), then look at syslog(3). The system call of this name is about controlling the kernel R printk () buffer, and the glibc version is called R klogctl (). The type argument determines the action taken by this function. Quoting from R kernel/printk.c :

/*
 * Commands to sys_syslog:
 *
 *      0 -- Close the log.  Currently a NOP.
 *      1 -- Open the log. Currently a NOP.
 *      2 -- Read from the log.
 *      3 -- Read up to the last 4k of messages in the ring buffer.
 *      4 -- Read and clear last 4k of messages in the ring buffer
 *      5 -- Clear ring buffer.
 *      6 -- Disable printk's to console
 *      7 -- Enable printk's to console
 *      8 -- Set level of messages printed to console
 *      9 -- Return number of unread characters in the log buffer
 */

Only function 3 is allowed to non-root processes. (Function 9 was added in 2.4.10.) The kernel log buffer
The kernel has a cyclic buffer of length LOG_BUF_LEN (4096, since 1.3.54: 8192, since 2.1.113: 16384; in recent kernels the size can be set at compile time) in which messages given as argument to the kernel function R printk () are stored (regardless of their loglevel). The call R syslog () (2,buf,len) waits until this kernel log buffer is nonempty, and then reads at most len bytes into the buffer buf. It returns the number of bytes read. Bytes read from the log disappear from the log buffer: the information can only be read once. This is the function executed by the kernel when a user program reads R /proc/kmsg . The call R syslog () (3,buf,len) will read the last len bytes from the log buffer (nondestructively), but will not read more than was written into the buffer since the last `clear ring buffer' command (which does not clear the buffer at all). It returns the number of bytes read. The call R syslog () (4,buf,len) does precisely the same, but also executes the `clear ring buffer' command. The call R syslog () (5,dummy,idummy) only executes the `clear ring buffer' command. The loglevel
The kernel routine R printk () will only print a message on the console, if it has a loglevel less than the value of the variable R console_loglevel . This variable initially has the value DEFAULT_CONSOLE_LOGLEVEL (7), but is set to 10 if the kernel command line contains the word `debug', and to 15 in case of a kernel fault (the 10 and 15 are just silly, and equivalent to 8). This variable is set (to a value in the range 1-8) by the call R syslog () (8,dummy,value). The calls R syslog () (type,dummy,idummy) with type equal to 6 or 7, set it to 1 (kernel panics only) or 7 (all except debugging messages), respectively. Every text line in a message has its own loglevel. This level is DEFAULT_MESSAGE_LOGLEVEL - 1 (6) unless the line starts with <d> where d is a digit in the range 1-7, in which case the level is d. The conventional meaning of the loglevel is defined in <linux/kernel.h> as follows:

#define KERN_EMERG    "<0>"  /* system is unusable               */
#define KERN_ALERT    "<1>"  /* action must be taken immediately */
#define KERN_CRIT     "<2>"  /* critical conditions              */
#define KERN_ERR      "<3>"  /* error conditions                 */
#define KERN_WARNING  "<4>"  /* warning conditions               */
#define KERN_NOTICE   "<5>"  /* normal but significant condition */
#define KERN_INFO     "<6>"  /* informational                    */
#define KERN_DEBUG    "<7>"  /* debug-level messages             */

In case of error, -1 is returned, and errno is set. Otherwise, for type equal to 2, 3 or 4, R syslog () returns the number of bytes read, and otherwise 0.

EINVAL

EPERM

ERESTARTSYS

This system call is Linux specific and should not be used in programs intended to be portable.

From the very start people noted that it is unfortunate that kernel call and library routine of the same name are entirely different animals. In libc4 and libc5 the number of this call was defined by R SYS_klog . In glibc 2.0 the syscall is baptized R klogctl ().

syslog(3)